0 Cookie Img

Froth Floatation Cel

Froth Floatation Cel
Froth Floatation Cel
Product Code : MOL-02
Product Description

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of  FROTH FLOATATION CEL.

Mixed liberated particles can be separated from each other by floatation if there is sufficient difference in their wettability. The floatation process operates by preparing a water suspension of a mixture of relatively finely sized solids. This is usually done in an agitated chamber open at the top. Fine bubbles of air are then dispersed through the agitated suspension to form a froth that rises to the top of the chamber. Particles that are radially wetted by water (hydrophilic) tend to remain in the water suspension. Those particles that are not easily wetted (hydrophobic) tend to be collected at the air bubble-water interface and rise to the surface attached to air bubbles. Thus differences in the surface chemical properties of the solids are the basis for separation. The set up consists of a agitated chamber open at the top. In the chamber, an impeller coupled to a shaft is fixed in a stationary diffuser. Low-pressure air is allowed to enter in the stationary diffuser through the air passage provided with the agitator. The collector-coated mineral particles adhere to the rising bubbles and are carried to the top of the cell to be removed in the froth product. The stepped pulley arrangement is done for moving the agitator at three different speeds. The set-up is complete with all accessories. 


To study the performance of Froth Flotation Cell

To find % recovery of mineral in froth from a standard mixture 


Feed Product

Electricity 1.5 kW, 1 ph

Water Supply.

Frothing agents and collectors (Kerosene Oil, Pine Oil & Sodium Lyle Sulphide) 


 Flotation Chamber Material SS  , Compatible capacity.
 Agitator SS Impeller with SS shaft coupled to FHP
  Standard Make motor
 Diffuser Material SS   holding the impeller.
 Froth Collecting Tank Material SS  , Capacity 20 Ltrs
 Air Compressor Suitable Capacity
 Control panel On / off switch, Mains Indicator & fuse etc
 A good quality painted rigid MS Structure is provided to support all the parts.


Contact Us

5309, Grain Market, Near B D Sen Sec School, Ambala Cantt, Haryana, 133001, India
Phone :+917259580925